***TXT.14: Insufficient length of line encountered for the Place Text On Line operation, with the left, center, or right justification option selected.
***TXT.13: Unable to determine the position of the text on the line (Place Text On Line operation, with left, center, or right justification selected).
***TXT.12: Text between points requires two unique points.
***TXT.11: One or more Text characters were not rounded, due to non-planar faces.
***TXT.10: Even though you have selected the Adjust Radius option, one or more Text characters have not been rounded. The system will only adjust the radius up to 1/4 of the size you enter in the dialog.
***TXT.9: The entity selected for the Edit Text Control Line operation is not a controlled text object.
***TXT.8: No or improper text object was selected for the Edit Text Control Line operation.
***TXT.7: One or more Text characters were not rounded, due to insufficient size of segments. You may reduce the size of the radius/offset parameter or select the Adjust Radius option to ask the system to do it for you, where needed.
***TXT.6: The system was unable to complete the derivation of a parallel line for the Text Between Parallel Lines operation.
***TXT.5: Improper or no path object was selected for the Place Text Along Path operation.
***TXT.4: No text object was selected for the Edit Text operation.
***TXT.3: Improper path object was selected for the Place Text Along Path operation.
***TXT.2: Less than the required number of path objects were selected for the Place Text Along Path operation.
***TXT.1: No path object was selected for the Place Text Along Path operation.
